|
 |
 |
|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
HARD WORKING PRODUCTS FOR HARD WORKING PEOPLE |  |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
 |
DS 1.1 STEP SUBMERSIBLE PRESSURE PUMP
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
HUGE 90 LITRE/MINUTE (5400 l/hr) |
|
54m maximum head |
|
7.0Bar at the pump maximum pressure |
|
Up to 20m maximum depth of submersion |
|
0.8Kw (1.1Hp) SINGLE PHASE |
|
STEP Submersible Pressure Pump. |
Latest in pumping technology.
IF YOU HAVE A WELL, BORE, DAM OR TANK NEAR A SINGLE PHASE POWER POINT, THIS IS ABOUT THE MOST WATER YOU WILL GET FROM A 4" SUBMERSIBLE SINGLE PHASE PUMP.
Extraordinarily efficient and extremely robust, only needs simple controls to be used as a fully functioning automatic pressure pump, with either pressure switch or standard electronic controller.
Awesome
performance - on our farm, this pump successfully replaces a 3-phase
5.5hp Lowarra Multistage NEMA submersible - at a fraction of the cost.
Recommended
as Most Suitable for garden and Household use.
This
pump is ideal for rainwater tanks, bores, wells, dams and any other
application where a single phase submersible pressure pump is
needed. It will not only get the water out of its storage,
wherever it is, it will deliver it at pressure.
Can
be mounted inside rainwater tanks for theft-free and quiet operation.
Non-tainting, suitable for drinking water.
This
pump does not require any fancy starters or controllers, because it has
an inbuilt capacitor. It will operate with either
with our PC-13 controller or pressure switch and bottle available
separately.
This
pump comes with a 10metre heavy duty cable with standard Australian
3-pin 10 amp plug.
Super
Quiet and Energy Efficient, it is backed up with industry-leading,
hassle free Warranty terms and conditions.
FEATURES:
| Heavy duty oil and water resistant cable, a very generous 10m length, can be plugged into a controller directly. |
| The water intake is right at the bottom of the pump, and this means low draw-down depth of only 10cm, as against 60-70cm for most NEMA submersibles. |
| Energy efficient - Low amp draw of under 10 amps compared to 12.5amps for other NEMA submersibles |
| Patented Ceramic wear surfaces for improved sand and rust handling |
| The water is pumped past the motor, keeping it cool and quiet. |
| Dry wound, oil filled motor, with heavy duty bearings and inbuilt thermal overload protection |
| 304 grade stainless pump body, 98mm diameter. |
| Self-lubricating Nylatron bearing resists wear from sand. |
| Acetyl impellors, Polycarbonate diffusers with patented stainless steel thrust surfaces for extra anti-wear. |
| Max operating pressure 7.0 bar |
|
Liquid
temperature up to 50oC
|
|
Ambient
temperature up to 40oC
|
|
Total
immersion depth up to 20m
|
|
Continuous
duty motor
|
|
Two-pole
induction motor (n=2850r.p.m)
|
|
Insulation
Class B
|
|
Protection
IP68
|
|
Pump
body: stainless 304
|
|
Impeller:
Acetal with Polycarbonate diffusers, Stainless thrust surfaces for
extra wear resistance.
|
|
Shaft
with rotor: Stainless steel and sealed heavy duty Bearings
|
|
Max
head: 56m (+20m immersion) = 76metre hmax
|
|
Outlet
32mm
|
|
Net
weight: 22kg
|
All
our pumps have a full 1 year return to base repair/replacement warranty
for those rare cases where a pump fails during its first year of
operation.
These quality water pumps are ideal for medium to large water tanks connected to domestic, garden or smaller commercial installations. All internals have been upgraded with stainless main shafts, top quality bearings and ceramic mechanical seals for years of reliable service.
(C) Copyright MTF WATER BRISBANE
|
